How to Wirelessly Connect iPad to Projector

Product: iPad, Networked Epson Projector, Software: iProjection

Audience: Staff

Revision Date: 11/10/22

Overview

This walkthrough will go over how to install iProjection app on a CSD Staff iPad and then connect to a networked projector. This will allow you to display/mirror your iPad to the projector without cabling or using another device as a medium.

Tools/Equipment Needed

• iPad
• Projector Remote

Install iProjection

Step 1

Find Mosyle Manager App and tap on it to open. 
Tip: If you swipe down on the screen you can search for “Manager” to isolate the app.

Step 2

After opening the “Manager” app, tap the “Self-Service” button.

Step 3

Next, locate the “Epson iProjection” app and tap on the “(Re)Install/Update” button.

It may take a few minutes to show up, but you should see the iProjection app appear on your home screen. Installation Complete!

Connect iPad to Projector

Step 1

From the home screen, Locate and Open Epson iProjection app by tapping on the icon.

Step 2

Once the app opens, tap on “QR Code Connection” button.

Step 3

The app will ask for permission to access the iPad’s camera, tap “OK”.

Step 4

Next, using the projector remote, turn on the projector and change the source to “LAN” by pressing the “LAN” button on the remote. The screen should display a QRcode, aim the iPad camera at the QRcode and it will complete the connection. 

Step 5

You should now see the iPad screen being mirrored to the projector screen. If you have multiple connections to the projector, such as HDMI, you may need to press the “Lan” button one more time, on the projector remote, to get it to display.

• Done!

Conclusion

You should have been able to install Epson iProjection app on your iPad and then connect your iPad to your network projector following the instructions provided. Please contact your building SPOC/Tech 1 or the Tech Help Desk for assistance if that was unsuccessful.

For instructional/pedagogical questions, please contact your Building Administrator or Student Growth & Experience (SG&E) Level Coordinator. 

For technical questions, please contact your building SPOC.